![]() |
Wed. 21 | Thu. 22 | Fri. 23 |
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
|
13:00 - 13:45 (45min)
Welcome Reception - Coffee
Welcome Reception with Coffee
13:45 - 14:00 (15min)
Conference opening
Welcomes attendees, introduces the conference theme, objectives, and agenda
14:00 - 15:00 (1h)
Plenary session - Classification of experimental squeal occurrences using a harmonic balance vector signal
![]() Etienne BALMES
15:00 - 15:45 (45min)
Numerical methods for structural dynamics
![]()
› A Comparison of Iterative Eigenvalue Solvers for Structures with Frequency-Dependent Material Properties
- Matteo COUET, Laboratoire de Mécanique des Structures et des Systèmes Couplés, Laboratoire de Tribologie et Dynamique des Systèmes, Safran Aircraft Engines
15:00-15:15 (15min)
› Fast computation of band diagram and band gap location from high order eigenvalue derivatives
- Benoit Nennig, Laboratoire QUARTZ
15:15-15:30 (15min)
› Dynamical analysis of viscoelastic structure based on the fractional models
- Rongqi DANG, Laboratoire de Mécanique Gabriel Lamé
15:30-15:45 (15min)
15:00 - 15:45 (45min)
Nonlinear Dynamics (including contact, impact, friction, ...)
![]()
› A contact damping in bearing model for improving robustness of a digital twin based faults diagnosis
- Ephraïm MOSHI NGELE, Institute of Thermics, Mechanics, Materials, Polytechnic Faculty, University of Lubumbashi 7110501 Lubumbashi
15:00-15:15 (15min)
› A unified framework for nonlinear vibrations of cables
- Charlélie BERTRAND, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
15:15-15:30 (15min)
› Bistable unit-cell, from the characterization of a single element to a lattice
- Antoine Faulconnier, Laboratoire QUARTZ
15:30-15:45 (15min)
15:45 - 16:30 (45min)
Coffee break
![]() 16:30 - 17:00 (30min)
Start-up plenary session - Validation of Image-Based Modal Analysis Techniques for Dynamic Characterization Using Synthetic Images
![]() Florent MATHIEU - EIKOSIM
17:00 - 17:45 (45min)
Experimentations in structural dynamics, sensors and metrology
![]()
› Robust camera-based vibration measurement in outdoor conditions using Line Segment Tracking
- Yunhyeok Han, Laboratoire QUARTZ
17:00-17:15 (15min)
› Versatile measurements tools for the dynamical characterization of a bridge assembly
- Nicolas Leconte, Laboratoire QUARTZ
17:15-17:30 (15min)
› Rotating Machine unstable operation detection using Dragonfly® sensors
- Vincent Bouillet, Wormsensing, Grenoble, France
17:30-17:45 (15min)
17:00 - 17:45 (45min)
Nonlinear Dynamics (including contact, impact, friction, ...)
› Flutter of Flexible Wings: A High-Speed Video Investigation
- Florian MAETZ, ISAE-Supméca Institut Supérieur de Mécanique de Paris
17:00-17:15 (15min)
› Optimisation and performance comparison of direct and parametric piezoelectric energy harvester with geometrical nonlinearities
- Hugo Fayolle, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
17:15-17:30 (15min)
› Phase resonance measurement of conservative nonlinear modes of highly flexible structures and damping estimation
- Olivier THOMAS, École Nationale Supérieure d'Arts et Métiers
17:30-17:45 (15min)
|
9:00 - 10:00 (1h)
Plenary session - From Noise to Insight: Turning Instantaneous Angular Speed Variability into Diagnostic Power
![]() Hugo ANDRE
10:00 - 11:00 (1h)
Rotating machinery
![]()
› Towards Automated Gear and Bearing Fault Diagnosis Using Evolving Frequency Signatures
- Anas Had, Université Jean Monnet Saint-Etienne, IUT de Roanne
10:00-10:15 (15min)
› Bearing Fault Diagnosis Based on IAS-LSTM Neural Networks Model
- Djihene Djeghloud, University of Reims Champagne-Ardenne
10:15-10:30 (15min)
› Cyclicity restoration of bearing signature in vibration-based condition monitoring: the case of the rolling elements
- Adrien MARSICK, Safran Aircraft Engines
10:30-10:45 (15min)
› Predictive Maintenance of Bearings Based on Damage Modeling and Vibration Data: Interest of a Phenomenological Damage Law
- Teddy KAYALA, Institut de Thermique, Mécanique et Matériaux, Faculté Polytechnique (Université de Kinshasa)
10:45-11:00 (15min)
10:00 - 11:00 (1h)
Digital Twin
![]()
› REAL-TIME DIGITAL TWIN FOR VEHICLE DYNAMICS
- André Buckenmeyer, Stellantis France, SUPMECA, Laboratoire Quartz
10:00-10:15 (15min)
› A neural network based model of a yaw damper for nonlinear multibody simulations
- Betty Auzanneau, Université Marie et Louis Pasteur, SUPMICROTECH, CNRS, institut FEMTO-ST, F-25000 Besançon, ALSTOM Transport SA, F-71200 Le Creusot
10:15-10:30 (15min)
› Digital twin of a vibrodriver to estimate the force transmitted on the test bench
- Antonio Baldassarre, ISAE-Supméca Institut Supérieur de Mécanique de Paris
10:30-10:45 (15min)
11:00 - 11:45 (45min)
Coffee break
![]() 11:45 - 12:45 (1h)
Rotating machinery
![]()
› Exploring Innovative Ordinal Pattern-Based entropies for Multimodal Time Series Analysis in Bearing Diagnostics
- Elga OSSONEMANE ASSEKO, laboratoire PRISME - Meryem Jabloun, Laboratoire PRISME - Emmanuel ATTAL, laboratoire PRISME
11:45-12:00 (15min)
› Operational Modal Analysis Improvement Through Operational-Based Normalization and Reconstruction of Nonlinear Cyclic Excitations in a Gearbox
- Mojtaba AHANI, Institut National des Sciences Appliquées de Lyon
12:00-12:15 (15min)
› Investigating Roller Bearing Faults Using Phase Permutation Entropy Applied to Acoustic-Vibration-Electrical modalities
- Philippe Ravier, laboratoire PRISME - Emmanuel ATTAL, Laboratoire PRISME - Meryem Jabloun, Laboratoire PRISME
12:15-12:30 (15min)
› Physics-Informed Few-Shot Learning for Accurate Gear Wear Monitoring in Digital Twin Systems
- Roee Cohen, PHM Lab, Department of Mechanical Engineering, Ben-Gurion University of the Negev,
12:30-12:45 (15min)
11:45 - 12:00 (15min)
Dynamics of MEMS and NEMS
![]() 12:00 - 12:15 (15min)
Model system and identification
![]() 12:15 - 12:45 (30min)
Active and passive control of vibrations
![]()
› Experimental Investigation of the Periodic Core Sandwich Structure: Shape of the Vibration Modes
- Guillaume ROBIN, Labex DAMAS, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux - El mostafa Daya, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux
12:15-12:30 (15min)
› Herschel-Quincke filters for vibrations : physical understanding and industrial-inspired numerical demonstrations
- Adrien Pelat, Laboratoire d'Acoustique de l'Université du Mans
12:30-12:45 (15min)
12:45 - 14:45 (2h)
Lunch
![]() 14:45 - 15:45 (1h)
Rotating machinery
![]()
› Improvement of cyclic spectral coherence map with the use of non-Gaussian signals transformation
- Daniel Kuzio, Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Na Grobli 15, 50-421 Wroclaw
14:45-15:00 (15min)
› A numerical application of modal accelerometer placement techniques to geared transmission monitoring
- Arthur Burel, LaMCoS, INSA Lyon, 69100 VILLEURBANNE, Safran Helicopter Engines
15:00-15:15 (15min)
› Influence of the Number of Rolling Elements on Signatures of Radial Bearings in Instantaneous Rotational Speed Signals
- Adeline BOURDON, Laboratoire de Mécanique des Contacts et des Structures
15:15-15:30 (15min)
› Improving Blade Tip Timing Accuracy Under Rotational Speed Variations
-
15:30-15:45 (15min)
14:45 - 15:45 (1h)
Active and passive control of vibrations
![]()
› Performance of a periodic absolute vibration filter in a sandwich structure
- Théo Bonneval, Institut Supérieur de lÁéronautique et de lÉspace
14:45-15:00 (15min)
› Modeling vibrations damping in composite beams with a viscoelastic core
-
15:00-15:15 (15min)
› Hybrid nonlinear energy sink for structural protection from high vibration levels
- Louis Mesny, Institut Supérieur de l'Aéronautique et de l'Espace
15:15-15:30 (15min)
› Advanced Suspension Technologies for Vibration Control
- Johann Roberjot, Thales LAS France, FEMTO-ST
15:30-15:45 (15min)
15:45 - 16:30 (45min)
Coffee break
![]() 16:30 - 17:00 (30min)
Start-up plenary session - MECALAM
![]() MECALAM
17:00 - 17:30 (30min)
Rotating machinery
![]()
› Condition monitoring based on simultaneous FBG sensor measurements on the inner and the outer race of a rolling element bearing
- Panagiotis Mantas, KU Leuven, Department of Mechanical Engineering, LMSD Division Mecha(tro)nic System Dynamics / Flanders Make
17:00-17:15 (15min)
› A Health Indicator Study For Early Fault Detection For Rolling Element Ball Bearings
- Zhen Li, KU Leuven, Department of Mechanical Engineering, LMSD Division Mecha(tro)nic System Dynamics, Flanders Make
17:15-17:30 (15min)
17:00 - 17:45 (45min)
Active and passive control of vibrations
![]()
› Active Control with a Robust Hybrid Tuned Mass Damper
- Simon Chesne, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]
17:00-17:15 (15min)
› Damping cable-driven parallel robot vibrations using active vibration control methods
- Thibault Garcia, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] - Didier Rémond, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]
17:15-17:30 (15min)
|
9:00 - 10:00 (1h)
Plenary session - Survival Guide to Vision-based Vibration Measurements
![]() Stefania LO FEUDO / Yunhyeok HAN
10:00 - 10:45 (45min)
Active and passive control of vibrations
![]()
› Design of a vibration isolator based on magnetorheological elastomers
- Emre CAVDAR, FEMTO-ST, Thales LAS France
10:00-10:15 (15min)
› Electromagnetic Shunt for Reducing Torsional Vibrations in a Rotating Elastic Structure Using an Electrical Machine as an Electromechanical Transducer
- Guillaume Hay, Arts et Metiers Institute of Technology, LISPEN, HESAM Université
10:15-10:30 (15min)
› Vibration optimization of a fiber optic interferometer
- Eliott Breton, Laboratoire d'acoustique de l'université du Mans
10:30-10:45 (15min)
10:00 - 10:45 (45min)
Electric machines
![]()
› Characterization of the dynamic behavior of laminated electric rotors
- Nour Abuhemeida, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174), ALSTOM
10:00-10:15 (15min)
› Projection of Magnetic Forces for the Calculation of Vibrations in Electrical Machines
- Raphaël Pile, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
10:15-10:30 (15min)
› Measurement of dynamic loads at bearing interface of an electrical motor by inverse method using piezoelectric gauges
- Hugo Siwiak, Vibratec
10:30-10:45 (15min)
10:45 - 11:45 (1h)
Coffee Break
![]() 11:45 - 12:30 (45min)
Vibroacoustics and fluid/structure interaction
![]()
› Comparison of Vibro-Acoustic Characterization Methods Applied to Plasterboards
- Théodore Braule, Saint-Gobain Recherche, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Laboratoire Vibrations Acoustique
11:45-12:00 (15min)
› Vortex-induced vibrations mitigation of a cantilevered hydrofoil with resonant piezoelectric shunt
- Arthur Haudeville, Laboratoire de Mécanique des Structures et des Systèmes Couplés, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
12:00-12:15 (15min)
› Comparative vibro-acoustic analysis using FEM and IGA in combination with the projection of modal basis
- Tommaso Landi, University of Salerno, Conservatoire National des Arts et Métiers
12:15-12:30 (15min)
11:45 - 12:45 (1h)
Vibration-based Structural Health Monitoring
![]()
› Detection and classification of track defects using axlebox accelerometers
- Jean-Baptiste Dupont, Vibratec
11:45-12:00 (15min)
› Dictionary Learning for Periodic Signals: Application to Rotating Machine Elementary Vibration Source Tracking
- Karim Abed-Meraim
12:00-12:15 (15min)
› Integration of multi-scale simulation, contribution to vibration monitoring
- Wang Chengcheng, Institut de Thermique, Mécanique, Matériaux
12:15-12:30 (15min)
› Convolutional Neural Network Based Structural Health Monitoring for IASC-ASCE Benchmark
- Chen SHI, Laboratoire de Mécanique de Normandie
12:30-12:45 (15min)
12:45 - 14:00 (1h15)
Lunch
![]() 14:00 - 15:00 (1h)
Remise ESCAPE GAME - CONCLUSION
-
|