› A Comparison of Iterative Eigenvalue Solvers for Structures with Frequency-Dependent Material Properties - Matteo COUET, Laboratoire de Mécanique des Structures et des Systèmes Couplés, Laboratoire de Tribologie et Dynamique des Systèmes, Safran Aircraft Engines
15:00-15:15 (15min)
› Fast computation of band diagram and band gap location from high order eigenvalue derivatives - Benoit Nennig, Laboratoire QUARTZ
15:15-15:30 (15min)
› Dynamical analysis of viscoelastic structure based on the fractional models - Rongqi DANG, Laboratoire de Mécanique Gabriel Lamé
15:30-15:45 (15min)
› A contact damping in bearing model for improving robustness of a digital twin based faults diagnosis - Ephraïm MOSHI NGELE, Institute of Thermics, Mechanics, Materials, Polytechnic Faculty, University of Lubumbashi 7110501 Lubumbashi
15:00-15:15 (15min)
› A unified framework for nonlinear vibrations of cables - Charlélie BERTRAND, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
15:15-15:30 (15min)
› Bistable unit-cell, from the characterization of a single element to a lattice - Antoine Faulconnier, Laboratoire QUARTZ
15:30-15:45 (15min)
› Flutter of Flexible Wings: A High-Speed Video Investigation - Florian MAETZ, ISAE-Supméca Institut Supérieur de Mécanique de Paris
17:00-17:15 (15min)
› Optimisation and performance comparison of direct and parametric piezoelectric energy harvester with geometrical nonlinearities - Hugo Fayolle, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
17:15-17:30 (15min)
› Phase resonance measurement of conservative nonlinear modes of highly flexible structures and damping estimation - Olivier THOMAS, École Nationale Supérieure d'Arts et Métiers
17:30-17:45 (15min)
› Towards Automated Gear and Bearing Fault Diagnosis Using Evolving Frequency Signatures - Anas Had, Université Jean Monnet Saint-Etienne, IUT de Roanne
10:00-10:15 (15min)
› Bearing Fault Diagnosis Based on IAS-LSTM Neural Networks Model - Djihene Djeghloud, University of Reims Champagne-Ardenne
10:15-10:30 (15min)
› Cyclicity restoration of bearing signature in vibration-based condition monitoring: the case of the rolling elements - Adrien MARSICK, Safran Aircraft Engines
10:30-10:45 (15min)
› Predictive Maintenance of Bearings Based on Damage Modeling and Vibration Data: Interest of a Phenomenological Damage Law - Teddy KAYALA, Institut de Thermique, Mécanique et Matériaux, Faculté Polytechnique (Université de Kinshasa)
10:45-11:00 (15min)
10:00 - 11:00 (1h)
Digital Twin
Amphiteatre Josette Genevois
› REAL-TIME DIGITAL TWIN FOR VEHICLE DYNAMICS - André Buckenmeyer, Stellantis France, SUPMECA, Laboratoire Quartz
10:00-10:15 (15min)
› A neural network based model of a yaw damper for nonlinear multibody simulations - Betty Auzanneau, Université Marie et Louis Pasteur, SUPMICROTECH, CNRS, institut FEMTO-ST, F-25000 Besançon, ALSTOM Transport SA, F-71200 Le Creusot
10:15-10:30 (15min)
› Digital twin of a vibrodriver to estimate the force transmitted on the test bench - Antonio Baldassarre, ISAE-Supméca Institut Supérieur de Mécanique de Paris
10:30-10:45 (15min)
› Exploring Innovative Ordinal Pattern-Based entropies for Multimodal Time Series Analysis in Bearing Diagnostics - Elga OSSONEMANE ASSEKO, laboratoire PRISME - Meryem Jabloun, Laboratoire PRISME - Emmanuel ATTAL, laboratoire PRISME
11:45-12:00 (15min)
› Operational Modal Analysis Improvement Through Operational-Based Normalization and Reconstruction of Nonlinear Cyclic Excitations in a Gearbox - Mojtaba AHANI, Institut National des Sciences Appliquées de Lyon
12:00-12:15 (15min)
› Investigating Roller Bearing Faults Using Phase Permutation Entropy Applied to Acoustic-Vibration-Electrical modalities - Philippe Ravier, laboratoire PRISME - Emmanuel ATTAL, Laboratoire PRISME - Meryem Jabloun, Laboratoire PRISME
12:15-12:30 (15min)
› Physics-Informed Few-Shot Learning for Accurate Gear Wear Monitoring in Digital Twin Systems - Roee Cohen, PHM Lab, Department of Mechanical Engineering, Ben-Gurion University of the Negev,
12:30-12:45 (15min)
11:45 - 12:00 (15min)
Dynamics of MEMS and NEMS
Amphiteatre Josette Genevois
12:00 - 12:15 (15min)
Model system and identification
Amphiteatre Josette Genevois
12:15 - 12:45 (30min)
Active and passive control of vibrations
Amphiteatre Josette Genevois
› Experimental Investigation of the Periodic Core Sandwich Structure: Shape of the Vibration Modes - Guillaume ROBIN, Labex DAMAS, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux - El mostafa Daya, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux
12:15-12:30 (15min)
› Herschel-Quincke filters for vibrations : physical understanding and industrial-inspired numerical demonstrations - Adrien Pelat, Laboratoire d'Acoustique de l'Université du Mans
12:30-12:45 (15min)
› Improvement of cyclic spectral coherence map with the use of non-Gaussian signals transformation - Daniel Kuzio, Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Na Grobli 15, 50-421 Wroclaw
14:45-15:00 (15min)
› A numerical application of modal accelerometer placement techniques to geared transmission monitoring - Arthur Burel, LaMCoS, INSA Lyon, 69100 VILLEURBANNE, Safran Helicopter Engines
15:00-15:15 (15min)
› Influence of the Number of Rolling Elements on Signatures of Radial Bearings in Instantaneous Rotational Speed Signals - Adeline BOURDON, Laboratoire de Mécanique des Contacts et des Structures
15:15-15:30 (15min)
› Improving Blade Tip Timing Accuracy Under Rotational Speed Variations -
15:30-15:45 (15min)
14:45 - 15:45 (1h)
Active and passive control of vibrations
Amphiteatre Josette Genevois
› Performance of a periodic absolute vibration filter in a sandwich structure - Théo Bonneval, Institut Supérieur de lÁéronautique et de lÉspace
14:45-15:00 (15min)
› Modeling vibrations damping in composite beams with a viscoelastic core -
15:00-15:15 (15min)
› Hybrid nonlinear energy sink for structural protection from high vibration levels - Louis Mesny, Institut Supérieur de l'Aéronautique et de l'Espace
15:15-15:30 (15min)
› Advanced Suspension Technologies for Vibration Control - Johann Roberjot, Thales LAS France, FEMTO-ST
15:30-15:45 (15min)
› Condition monitoring based on simultaneous FBG sensor measurements on the inner and the outer race of a rolling element bearing - Panagiotis Mantas, KU Leuven, Department of Mechanical Engineering, LMSD Division Mecha(tro)nic System Dynamics / Flanders Make
17:00-17:15 (15min)
› A Health Indicator Study For Early Fault Detection For Rolling Element Ball Bearings - Zhen Li, KU Leuven, Department of Mechanical Engineering, LMSD Division Mecha(tro)nic System Dynamics, Flanders Make
17:15-17:30 (15min)
17:00 - 17:45 (45min)
Active and passive control of vibrations
Amphiteatre Josette Genevois
› Active Control with a Robust Hybrid Tuned Mass Damper - Simon Chesne, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]
17:00-17:15 (15min)
› Damping cable-driven parallel robot vibrations using active vibration control methods - Thibault Garcia, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] - Didier Rémond, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]
17:15-17:30 (15min)
› Design of a vibration isolator based on magnetorheological elastomers - Emre CAVDAR, FEMTO-ST, Thales LAS France
10:00-10:15 (15min)
› Electromagnetic Shunt for Reducing Torsional Vibrations in a Rotating Elastic Structure Using an Electrical Machine as an Electromechanical Transducer - Guillaume Hay, Arts et Metiers Institute of Technology, LISPEN, HESAM Université
10:15-10:30 (15min)
› Vibration optimization of a fiber optic interferometer - Eliott Breton, Laboratoire d'acoustique de l'université du Mans
10:30-10:45 (15min)
10:00 - 10:45 (45min)
Electric machines
Amphiteatre Geneviève Inglebert
› Characterization of the dynamic behavior of laminated electric rotors - Nour Abuhemeida, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174), ALSTOM
10:00-10:15 (15min)
› Projection of Magnetic Forces for the Calculation of Vibrations in Electrical Machines - Raphaël Pile, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
10:15-10:30 (15min)
› Measurement of dynamic loads at bearing interface of an electrical motor by inverse method using piezoelectric gauges - Hugo Siwiak, Vibratec
10:30-10:45 (15min)
› Comparison of Vibro-Acoustic Characterization Methods Applied to Plasterboards - Théodore Braule, Saint-Gobain Recherche, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Laboratoire Vibrations Acoustique
11:45-12:00 (15min)
› Vortex-induced vibrations mitigation of a cantilevered hydrofoil with resonant piezoelectric shunt - Arthur Haudeville, Laboratoire de Mécanique des Structures et des Systèmes Couplés, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697, Laboratoire d'Ingénierie des Systèmes Physiques et Numériques
12:00-12:15 (15min)
› Comparative vibro-acoustic analysis using FEM and IGA in combination with the projection of modal basis - Tommaso Landi, University of Salerno, Conservatoire National des Arts et Métiers
12:15-12:30 (15min)
11:45 - 12:45 (1h)
Vibration-based Structural Health Monitoring
Amphiteatre Geneviève Inglebert
› Detection and classification of track defects using axlebox accelerometers - Jean-Baptiste Dupont, Vibratec
11:45-12:00 (15min)
› Dictionary Learning for Periodic Signals: Application to Rotating Machine Elementary Vibration Source Tracking - Karim Abed-Meraim
12:00-12:15 (15min)
› Integration of multi-scale simulation, contribution to vibration monitoring - Wang Chengcheng, Institut de Thermique, Mécanique, Matériaux
12:15-12:30 (15min)
› Convolutional Neural Network Based Structural Health Monitoring for IASC-ASCE Benchmark - Chen SHI, Laboratoire de Mécanique de Normandie
12:30-12:45 (15min)